Summer Memories Photo Album

Item # 262492791P29
Beginner 1-2 Hours

SUPPLIES & TOOLS:

  • Siser® Juliet™ Cutter
  • Siser DiamondDust™ Pink Salt
  • Siser EasyWeed® White
  • Park Lane® 8 1/2"x 11" Scrapbook Album with Frame Tea
  • Siser Weeder
  • 24pk 10"x 15" Wilton® Candy Melts® Parchment Sheets or Other Cover Sheet
  • Siser 9"x 12" Heat Press
  • Scissors

DIRECTIONS:


  • To download the SVG files, click on the links below, then right click on the image to save as an SVG to your device.
  • SUMMER MEMORIES PHOTO ALBUM SVG Click Here

    1. Click here for the "Summer Memories Photo Album" design, then upload into Leonardo™ Design Studio. Resize to fit photo album if needed.
    2. Place DiamondDust pink salt onto the cutting mat with the shiny side facing down and load into the Juliet cutter. Select the pre-set cut settings for Glitter from the cutter touch screen. In Leonardo Design Studio, mirror the design and cut. Remove mat and vinyl from the cutter when finished.
    3. Place EasyWeed white onto the cutting mat with the carrier side facing down and load into the Juliet cutter. Select the pre-set cut settings for EasyWeed from the cutter touch screen. In Leonardo Design Studio, mirror the design and cut. Remove mat and vinyl from the cutter when finished.
    4. Use scissors to cut the designs from each material to save any unused vinyl. Use the EasyWeeder to remove excess material from your designs. Don't forget the cavities.
    5. Set the temperature on the Siser Heat Press to 305F/150C. Open the photo album and arrange the front cover on the heat press platen. Pre-press the photo album for a few seconds to remove any wrinkles or moisture.
    6. Arrange the EasyWeed white on the photo album. Cover with parchment paper and tack down by pressing for 1-3 seconds, then peel the carrier hot.
    7. Arrange the DiamondDust pink salt on the photo album. Cover with parchment paper and press for 15 seconds, then wait an additional 10 seconds before peeling the carrier warm.

    JOANN HACKS:

    • This project can also be completed with another cutter of your choice. You may have to adjust time and/or temps.

    More Project Ideas