SUPPLIES & TOOLS:
- 1/2yd utility mesh fabric
- 6 1/2"x 25" contrast fabric for bottom & casing
- 1yd 9/32 cotton cable cord
- 1/2" double fold bias tape
- Matching Thread
- Basic Sewing Supplies
- Cut (1) 25"x 15" from mesh.
- Cut (1) 25"x 4" from contrast for bottom.
- Cut (1) 25"x 2 1/2" from contrast for casing.
- Press under 1/2" on top edge of contrast bottom trim.
- Pin bottom trim to bottom edge of mesh.
- Edge stitch pressed edge.
- Press casing in half lengthwise, open and press edges under 1/4" on each side.
- Press under 1/4" on each end.
- Pin casing to top edge of mesh having mesh at the fold; edge stitch casing.
- With RST, fold bag in half, matching bottom contrast at the side; pin.
- Encase side and bottom seam with bias tape and stitch.
- Turn RS out.
- Thread cable cord through casing and knot ends.
FINAL MEASUREMENT: 12"x 14"
DIRECTIONS:-
NOTE: Use 1/2" seam allowance.