SUPPLIES & TOOLS:
DIRECTIONS:
JOANN HACKS:
- Plain drink tumbler
- We R’ Spinner Tumbler Turner
- Box of We R’ epoxy kit
- Rubbing alcohol
- Paper towels
- Small mixing cups, 2
- Alcohol Inks
- Medium disposable mixing cup
- Wooden stirring stick or metal stick (preferred)
- Glitter, 2-3 different kinds
- Silver metallic markers
- Mod
Podge - Medium paintbrush
- Timer
- Roll of electrical tape
- Scissors
- Heat Gun
- X-Acto® knife
- Sandpaper, various grits
- Acrylic spray sealer
- Plastic gloves
DIRECTIONS:
- Use Mod
Podge and apply a layer onto the tumbler where you want to apply the first color. Place it on thick and gently press in with your fingers. Let that area dry. - Apply more Mod
Podge to the next area and repeat applying the glitter and letting it dry. - Once you have applied all of the glitter, then use the acrylic sealer and coat the tumbler. Let it dry.
- Place the tumbler onto the We R’
turner Make sure the tumbler is level before starting the rotation.- Follow the instructions on the epoxy kit
- Let the tumbler spin for at least 4 hours.
- You made need to put on multiple coats.
- Sand between coats.
- After you have put on the second coat, them use the metallic marker to draw on the
Geod pattern. - For final coat, put on a thin coat and press it as you are wiping it onto the tumbler.
JOANN HACKS:
- Use your heat gun to heat up Bottle A as you are pouring the two together into one cup. Stir with a metal stir stick (preferred) or wooden stick.
- Mix for three minutes and let it sit for 1 minute before applying.