SUPPLIES & TOOLS:
- Bulls Eye 1/2-3® Primer with Turbo Spray Primer
- 2X Ultra Cover® Spray Paint in various colors
- Rust-Oleum® Stops Rust Metallic spray paint
- Tape measure & ruler
- Kraft paper or newspaper
- Label maker (optional)
- Pegboard hooks
- Painter's tape
- Pegboard
DIRECTIONS:
- Following the instructions on the can, prime the peg board with the Bulls Eye 1/2-3 primer spray paint in the Turbo Spray System, then let it dry.
- Lay out your tools on the peg board to know where you want to hang them.
- Mark a square or rectangle around each tool with painter's tape and remove the tools.
- Mask off the surrounding area of peg board with Kraft paper or newspaper and spray paint the squares and rectangles with Painter's Touch 2X Ultra Cover spray paint in your choice of color, according to the directions on the can.
- Continue spray painting squares and rectangles until they are all done. Let all paint dry for 24 hours.
- Hang your peg board on the garage or tool shed wall and hang your tools in their respective places on the peg board with hooks.
JOANN HACKS:
- As an option, use a label maker to identify which tool goes where.