SUPPLIES & TOOLS:
- 1 yd Fleece
- 1 pkg Poly-fil
- Basic sewing supplies
DIRECTIONS:(1/2" seam allowance)
- Cut 2 - Dino pattern.
- With RST, stitch around outside of pattern leaving an opening for turning.
- Turn and stuff.
- Stitch opening closed.
Rolled Hem Fleece Throw
SUPPLIES & TOOLS:
- 1 1/2 yd Fleece (or desired length)
- Basic sewing supplies
DIRECTIONS:
- Cut off all selvages on outer sides.
- Fold cut edges to back 1/2", and roll again 1/2" and pin.
- Machine stitch along inside edge using a long running stitch.
Christmas Fleece Pillow Case
SUPPLIES & TOOLS:
- 1 yd solid fleece for pillow case
- 1/3 yd coordinating fleece print for band
- Basic sewing supplies
DIRECTIONS: 1/2" seam allowance
- Cut two 22"x 27" from solid fleece for main pillow case
- Cut one 43"x 10" from fleece print for band
- Sew along the short side (10") of fleece print forming a tube.
- Fold in half with WST forming a band.
- Pin the 22"x 27" with RST and stitch along both long sides and short bottom side.
- Pin the cut edges of the pillowcase and the band RST.
- Stitch through all three layers.
- Turn band out and press the inside seam towards the pillowcase.
Snowflake Fleece Pillows
SUPPLIES & TOOLS:
- 1 yd Fleece Snowflake Pillows
- 1 yd White pompom trim
- 2 - 14" pillow forms
- Basic sewing supplies
DIRECTIONS:
- 14" pillow - Cut one 15"x 15" square and two 15"x 11" for back.
- For the pillow with trim, pin trim to outside edge of 15" square and sew in place.
- Layer right sides together, overlapping the back two pieces.
- Sew a 1/2" seam around outside of pillow.
- Turn and insert pillow form.
Rated 3 out of
5
by
Sydthesquid from
It looked weird
I don't know if I just sewed it wrong or traced the template wrong but it turned out weird in the front and doesn't really need two of the legs, it was a neat design, but this is my opinion maybe it was just something I did wrong. :/
Date published: 2021-04-10