SUPPLIES & TOOLS:
- Plain drink tumbler
- We R’ Spinner Tumbler Turner
- Box of We R’ epoxy kit
- Rubbing alcohol
- Paper towels
- Stickers
- Cricut® machine
- Adhesive vinyl in any color
- Strong clear tack vinyl
- Medium disposable mixing cup
- Small mixing cups, 2
- Wooden stirring stick or metal stick (preferred)
- Medium paintbrush
- Timer
- Roll of electrical tape
- Scissors
- Heat Gun
- X-Acto® knife
- Sandpaper, various grits
- Plastic gloves
DIRECTIONS:
- Cut the monogram out using your Cricut machine and Design Space.
- Place the Monogram onto the tumbler using the strong clear tack.
- Press firmly.
- Follow the instructions on the epoxy kit to mix the resin.
- While mixing the resin, set aside two small cups to mix the color for the resin.
- Place the tumbler onto the We R’ turner.
- Make sure the tumbler is level before starting the rotation.
- Apply the clear resin onto the tumbler.
- Use the heat gun to remove any air bubbles.
- Let the tumbler spin for at least 4 hours.
- You may need to put on multiple coats.
- Sand between coats.
- For final coat, put on a thin coat and press it as you are wiping it onto the tumbler.
JOANN HACKS:
- Use your heat gun to heat up Bottle A as you are pouring the two together into one cup. Stir with a metal stir stick (preferred) or wooden stick. Mix for three minutes and let it sit for one minute before applying.