Coffee Lover Cricut Infusible Ink Mug

SUPPLIES & TOOLS:_x000D_

_x000D_
• Infusible Ink Transfer sheets
_x000D_
• Standard grip Machine Mat, 12"x 12"
_x000D_
• Cricut Mug Press
_x000D_
• Heat resistant tape (optional)
_x000D_
• Cricut ceramic mug blank
_x000D_
• Coffee Lover SVG file
_x000D_

_x000D_
_x000D_ DIRECTIONS:_x000D_

_x000D_
• To download the SVG files, to load directly into Cricut Design Space click on the links below.
_x000D_
• Coffee Lover Click Here
_x000D_

_x000D_ NOTE: This project uses Infusible Ink Transfer Sheets to create a custom mug. For best results, use a Cricut Mug Blank bearing the Infusible Ink compatibility badge._x000D_ _x000D_

_x000D_
1. To begin, download the provided SVG file. Upload it into your Cricut Design Space software and resize the design to the size you need for your mug.
_x000D_
2. When you’re ready, select Make It, then mirror the design.
_x000D_
3. Place Infusible Ink Transfer sheets shiny side down on mat, and follow the Design Space prompts to cut the image.
_x000D_
4. Remove unwanted pieces of the design, leaving the design on clear liner.
_x000D_
5. Apply the design to your Cricut Mug blank, securing in place with Heat Resistant Tape.
_x000D_
6. Connect your Cricut Mug Press to your computer and a power source and turn in the machine to warm it up.
_x000D_
7. Once Cricut Mug Press has reached pressing temperature, insert mug into press, and lower lever to start transfer.
_x000D_
8. After the beep, remove mug from press, only touching the handle of the mug, and place on a heat-resistant surface. Once completely cool, remove transfer sheet to reveal the design.
_x000D_

_x000D_